Gossen GL SpectroSoft - Manual (Page 33)

GOSSEN Foto- und Lichtmesstechnik GmbH 33
7.2 Pass/Fail Editor
Pass/Fail tool (Tools->Pass/Fail Editor) allows to define user conditions which light
should meet and should be checked after a measurement.
Prepare conditions or open previously prepared and turn on pass/fail function.
Turn on/off pass/fail check
Selectsthe parametersto
be monitored
Setrange (min-max )
Use current
measurement
as a reference
signal and find
similar with
defined
tolerance.
Binning and
brightness
monitoring