Gossen GL SpectroSoft User Manual
Page 21
GOSSEN Foto- und Lichtmesstechnik GmbH
21
4. Place the GL SPECTIS 1.0 in the shown place and Click the icon twice to make
measurement. The program sets the next measurement location in which to place
the spectrometer and measure. Proceed untill the procedure is finished.
5. After completing the measurements in all set locations the result dialog box will
appear with indication of test results.
6. After completion of the measurement procedure you can generate the report. To do
this, click the Report at the bottom of the measurement.
5.3
Edit
Zoom in
- zoom in a spectrum chart
Zoom out
- zoom out a spectrum chart
Zoom max - optimizes the view of the whole spectrum chart in the
current window size.
Switch to left
- switch spectrum chart view to the previous measurement
Switch to right - switch spectrum chart view to the next measurement
Switch to the end - switch spectrum chart view to the last measurements
Switch to all - switch spectrum chart view to the all measurements view
Always zoom max - a new measurement always openes in the optimized view of the
whole spectrum chart
PPFD view - turn on/off photosynthetic photon flux density view (spectrum chart
background changes to light green colour in this mode). PPFD is the measure of the the
number of photons (in the photosynthetically active range of 400nm-700nm) that fall on
1 square meter per second.
Paint wavelengths - turn on/off spectrum chart coloring.