Gossen GL SpectroSoft User Manual
Page 14
GOSSEN Foto- und Lichtmesstechnik GmbH
14
3
Startup
Measurement and analysis using GL SPECTROSOFT
Startup
1. Connect your measuring instrument with USB cable to your computer.
2. Start the SPX driver Software (only when use Spectis touch 1.0 or 8.0).
3. Select a device type in File->Settings (default device depends on the device you
choose during installation).
4. Insert the HASP USB Key, and wait several seconds for the system to install the
key.
5. Now you can run the GL SPECTROSOFT.
In the upper left corner there is a description of the currently running program options.
Below you will find the icons bar for all functions of the program.