Gossen GL SpectroSoft - Manual (Page 13)

GOSSEN Foto- und Lichtmesstechnik GmbH 13
Additional Function License
To add new functionality to your software:
1. Connect the device and make at least one measurement.
2. Generate a request code - request code appears in the Request code field.
3. Save the request code with the Save to file button and send it to your reseller.
4. Get an additional function code from your reseller and load it with Load licence from
file (a code should appear in the Additional function code field)
5. Add a licence key with the Add licence keybutton.
6. Restart the software.
After the software restarts, the new functionality is available.