Brother BAS-311F-L - Manual (Page 65)

11. CHANGING SPECIAL FUNCTION AND USING THE MEMORY SWITCHES
BAS-311F-0, 311F-L, 326F-0
58
1286S
11. CHANGING SPECIAL FUNCTIONS AND
USING THE MEMORY SWITCHES
The functions of the switches on the operation panel can be changed to carry out special functions.
* All of the memory switches are set to OFF at the time of shipment.
Note
The following are special uses. All of the memory switch is usually set to OFF.
1. Turn on the power switch.
2. While pressing the TEST switch (1), press the STEP BACK switch (2) to switch to setting mode.
3. Press the program select switch (4) so that the number displayed on the display screen (3) matches the switch number
(00 - 3F) for the function that you would like to select from the table.
4. Press the STEP BACK switch (2) to switch the setting appearing in the display screen (5) from OFF to ON.
If pressed once more:
If the B.T. CHANGE switch (6) is pressed at this time, all memory switch settings will be changed to OFF.
5. Press the TEST switch (1). The display will return to normal.
Note
The following steps set the memory switch settings separately for each program number.
6. Once the program data has been read from the floppy disk, change to memory switch setting mode and then press the
B.T SET switch (7). The buzzer will sound twice, and the current memory switch settings will be written to the floppy
disk.
(3)
(4)
(5)
(7)
(6)
(1) (2)
1281S
1287S