Brother BAS-311F-L - Manual (Page 61)

10. DIP SWITCH
BAS-311F-0, 311F-L, 326F-0
54
10. DIP SWITCH
Note
All DIP switches are set to OFF at the time of shipment.
When changing DIP switch, the power must be off.
10-1. Panel DIP switch functions
DIP switch
A
SW No. When ON
A-1
After sewing is complete, the work clamp is raised by the operator and does not rise automatically.
Various setting combinations for DIP switch No. 2, No. 3 and No. 4 can be used to change the way the work clamp is
raised and lowered.
For Air-type work clamps, the operation mode can be changed using the two-stage work clamp switch.
SW
A-2 SW
A-3 SW
A-4
Type Function of work clamp pedal
- - -
Solenoid/
Pneumatic
Work clamp and presser foot rise and lower simultaneously.
ON - -
Solenoid/
Pneumatic
Only work clamp rises and lowers; presser foot lowers when starting
switch is pressed.
- ON - Air For split-type presser foot, the left/right order changes alternately.
ON ON - Air
Only work clamp rises and lowers; presser foot lowers when starting
switch is pressed.
- - ON Air Work clamp and presser foot rise and lower simultaneously.
ON - ON Air
Lowers in the order right work clamp, left work clamp, presser foot;
reverse order when rising.
- ON ON Air
Lowers in the order left work clamp, right work clamp, presser foot;
reverse order when rising.
ON ON ON Air
Lowers in the order left and right work clamp, presser foot; reverse order
when rising.
1224S