GBC 2064WF User Manual

Page 6

GBC 2064WF-1

Operation Manual

SPECIFICATIONS

Operating Speed

Up to 18 fpm (5.5 mpm) MAX

Maximum Temperature

300°F (149°C)

Maximum Mounting
Thickness

Main Roller-1 in. (25.4 mm) Max.

Pull Roller-1/2 in. (12.5mm) Working gap. 1 in. total opening gap.

Maximum Film Width

64 in. (162.5 cm)

Dimensions (W x D x
H)

Unit alone: (Uncrated)
82.5in x 41in x 54in

(209cm x 104cm x 137cm)

Depth of 2064WF-1 is 44in (112 cm) with tables in up position.

Weight

Unit alone: 1500 lb (680 Kg).
Shipping: 1700 lb (771 Kg).

Electrical Requirements

US Models-

CE Models-

Refer to the serial plate located on the rear of the laminator for the specific electrical rating
applicable to the unit.

220V, 40Amps, 60 HZ. Single Phase. 8500Watts

380VAC, 13Amps, 50HZ. 3 Phase, 8500 Watts

FCC NOTE

FCC Class A Notice - Notification pour les Etats-Unis

Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiated radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at their
own expense.

Canada Class A Notice - Avis Canada, Class A

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Modifications

Any modifications made to this device that are not approved by General Binding Corporation
may void the authority granted to the user by the FCC and/or by Industry Canada to operate this
equipment.

Toutes modifications apportées à ce dispositif et non approuvées par General Binding
Corporation annuleront le droit accordé à l'utilisateur par le FCC et/ou par Industrie Canada de
faire fonctionner cet équipement.