E-flite 3-Cell LiPo Balancing Charger, 0.8A - Manual

Battery Warnings, Guidelines and Charging
While the 11.1V 800mAh -cell Lithium Polymer Battery Pack (EFLB099) included with your Blade™
CP Pro features Charge Protection Circuitry and Balance Charging via the included -cell Lithium
Polymer Balance Charger (EFLC10) to help ensure a safe charge every time, you MUST read the
following safety instructions and warnings before handling, charging or using the Li-Po battery pack.
Note: Lithium Polymer batteries are significantly more volatile than the alkaline, Ni-Cd or
Ni-MH batteries used in RC applications. All instructions and warnings must be followed
exactly. Mishandling of Li-Po batteries can result in fire.
By handling, charging or using the included Li-Po battery you assume all risks associated with lithium
batteries. If you do not agree with these conditions, return your complete Blade CP Pro model in new,
unused condition to the place of purchase immediately.
•. You.must.charge.the.included.11 .1V.800mAh.3-cell.Li-Po.battery.pack.in.a.safe.area.away.from..
flammable.materials .
•. Do.not.charge.the.battery.when.installed.in.the.helicopter .
•. Never.charge.the.battery.unattended ..When.charging.the.battery.you.should.always.remain.in.constant.
observation.to.monitor.the.charging.process.and.react.to.potential.problems.that.may.occur .
•. After.flight,.the.battery.must.be.cooled.to.ambient.temperature.before.charging .
•. You MUST use the included -cell 11.1V Li-Po Balance Charger ONLY..Failure.to.do.so.may.result.in.a.
fire.causing.personal.injury.and/or.property.damage ..DO NOT use a Ni-Cd or Ni-MH charger.