E-flite 800mAh 3S 11.1V 30C LiPo, 18AWG JST - Manual

4 1
High-Power Series Lithium Polymer (Li-Po) Batteries
Thank you for purchasing an E-flite Lithium Polymer (Li-Po) battery. E-flite Li-Po batteries offer an excellent blend of weight, power and performance. However,
like all Li-Po batteries, they require proper handling and care for safe and maximum performance.
Lithium Polymer batteries come partially charged and are significantly more volatile than the alkaline, Ni-Cd or Ni-MH batteries used in RC
applications. Keep batteries out of reach of children, unless supervised by a responsible adult. All instructions and warnings must be followed
exactly. MISHANDLING OF Li-Po BATTERIES CAN RESULT IN FIRE. For more information, please read the following instructions in their entirety before
handling and using. By handling, charging or using this Li-Po battery, you assume all risks associated with lithium polymer batteries. If you do not
agree with these conditions, return the battery in new, unused condition to the place of purchase immediately.
Handling and Storage Guidelines
1)
Li-Po batteries should always be handled with extreme care. Care should be taken to prevent them from being dinged, dented, punctured (especially
by metallic objects such as screwdrivers or hobby knives) or otherwise damaged.
2) Care should be taken to ensure that the battery is never shorted. Even a brief short can cause permanent and catastrophic damage to the battery and
can result in fire. A battery that has been shorted for even just a split second should be placed in an open area away from flammable materials and
observed for at least 15 minutes. It should also be removed from service entirely. To help prevent shorts, it is best to store and transport the battery in a
non-conductive (and preferably fire-proof) container and/or to cover the connectors with a non-conductive material.
3) When temporarily storing or transporting the battery, the temperature range should be from approximately 40–120 degrees Fahrenheit for the best
results. Do not store the battery in a car or direct sunlight whenever possible. If stored in a hot car, the battery can be damaged or even catch fire if the
temperature inside the car becomes too hot.
4) Store the battery at room temperature and approximately 1/2 charge for best results. A Li-Po cell is approximately 50% charged when it is at 3.8V.
The approximate 1/2 charge voltage for a 2S (7.4V nominal) battery is 7.6V The approximate 1/2 charge voltage for a 5S (18.5V nominal) battery is 19.0V
The approximate 1/2 charge voltage for a 3S (11.1V nominal) battery is 11.4V The approximate 1/2 charge voltage for a 6S (22.2V nominal) battery is 22.8V
The approximate 1/2 charge voltage for a 4S (14.8V nominal) battery is 15.2V
Before the First Charge
1) Make a visual and physical inspection of the battery. Look for any damaged or loose leads or connectors, broken shrink tubing or other irregularities which
may cause a short circuit and eventual fire.
2) Check for proper polarity of the factory installed leads and connectors. Use a digital voltmeter to ensure that the polarities are correct.
3) Check the voltage of the battery using a digital voltmeter or the E-flite Power Meter (EFLA110). The voltage of the cells within the battery should be
between 3.5V and 3.9V each.
The voltage of a new 2S (7.4V nominal) battery should be between 7.0V and 7.8V
The voltage of a new 3S (11.1V nominal) battery should be between 10.5V and 11.7V
The voltage of a new 4S (14.8V nominal) battery should be between 14.0V and 15.6V
The voltage of a new 5S (18.5V nominal) battery should be between 17.5V and 19.5V
The voltage of a new 6S (22.2V nominal) battery should be between 21.0V and 23.4V
4) In order to comply with shipping regulations and safety, the 6S 5000mAh battery is equipped with external series wire leads with gold bullet connectors
that are shipped disconnected so the pack is considered as two 11.1V packs connected in series. You are required to connect the series wire leads before
first use by connecting the two bullet connectors in order for this pack to properly operate as a 22.2V pack. Before shipping this pack for any reason in the
future, you will need to disconnect the series leads first.
If any damage or irregularities are found, the polarity of the wire leads or connectors are not correct, or the voltage of the battery is more or less
than the ranges listed above, call 877.504.0233 toll-free to speak to a service technician. DO NOT continue to handle or attempt to use the battery
without further instructions.
Charging Guidelines and Warnings
1)
You MUST use a charger specifically designed to charge Li-Po batteries ONLY. The charger must be capable of “constant current / constant voltage”
charging. Failure to use the proper charger may result in a fire causing personal injury and/or property damage.
DO NOT use an Ni-Cd or Ni-MH charger
at any time.
2) The battery should always be charged in an open area away from, and not placed on, any flammable materials. The battery should never be charged
inside of the model or a full-size vehicle. It is also suggested that an “ABC” type fire extinguisher be readily accessible in the charging area in case any
issues resulting in fire are experienced.
3) Never charge the battery unattended. When charging the battery, you should always remain in constant observation to monitor the charging process
and react to potential problems that may occur.
must contact Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For
questions or assistance, please direct your email to [email protected], or call 877.504.0233 toll free to speak to a service technician.
Inspection or Repairs
If this Product needs to be inspected or repaired, please call for a Return Merchandise Authorization (RMA). Pack the Product securely using a shipping carton.
Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that
provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility.
A Service Repair Request is available at www.horizonhobby.com on the “Support” tab. If you do not have internet access, please include a letter with your
complete name, street address, email address and phone number where you can be reached during business days, your RMA number, a list of the included
items, method of payment for any non-warranty expenses and a brief summary of the problem. Your original sales receipt must also be included for warranty
consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
Warranty Inspection and Repairs
To receive warranty service, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met,
your Product will be repaired or replaced free of charge. Repair or replacement decisions are at the sole discretion of Horizon Hobby.
Non-Warranty Repairs
Should your repair not be covered by warranty the repair will be completed and payment will be required without notification or estimate of the expense unless
the expense exceeds 50% of the retail purchase cost. By submitting the item for repair you are agreeing to payment of the repair without notification. Repair
estimates are available upon request. You must include this request with your repair. Non-warranty repair estimates will be billed a minimum of ½ hour of labor.
In addition you will be billed for return freight. Please advise us of your preferred method of payment. Horizon accepts money orders and cashiers checks, as
well as Visa, MasterCard, American Express, and Discover cards. If you choose to pay by credit card, please include your credit card number and expiration
date. Any repair left unpaid or unclaimed after 90 days will be considered abandoned and will be disposed of accordingly. Please note: non-warranty repair is
only available on electronics and model engines.
United States
Electronics and engines requiring inspection or repair should be shipped to the following address:
Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822
USA
All other Products requiring warranty inspection or repair should be shipped to the following address:
Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822
USA
Please call 877-504-0233 or e-mail us at [email protected] with any questions or concerns regarding this product or warranty.
United Kingdom
Electronics and engines requiring inspection or repair should be shipped to the following address:
Horizon Hobby UK
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom
Please call +44 (0) 1279 641 097 or e-mail us at [email protected] with any questions or concerns regarding this product or warranty.
Germany
Electronics and engines requiring inspection or repair should be shipped to the following address:
Horizon Technischer Service
Hamburger Strasse 10
25335 Elmshorn
Germany
Please call +49 4121 46199 66 or e-mail us at [email protected] with any questions or concerns regarding this product or warranty.
Instructions for Disposal of WEEE by Users in the European Union
This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it
over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your
waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local
city office, your household waste disposal service or where you purchased the product.
© 2009 Horizon Hobby, Inc. 4105 Fieldstone Rd. Champaign, IL 61822 USA www.horizonhobby.com Printed 07/09 16323