E-flite 25-Size Fiberglass ARF Floats - Manual (Page 17)

 1. Locate the holes on the fuselage for the rear
landing gear. These are located behind the air
exit on the fuselage. Use a hobby knife to
remove the covering. Attach the landing gear
to the fuselage using three 4-40 x 1/2" socket
head screws.
Float Installation (Ultra Stick 25e)
Required Parts
• Fuselage • Landing gear
• 3mm setscrew (4)
• Nylon bracket (4)
• 4-40 x 1/2" socket head screw (3)
• 5/32" wheel collar (4)
• 3mm x 12mm sheet metal screw (16)
Required Tools and Adhesives
• Phillips screwdriver • File or rotary tool
• Threadlock • Hobby knife
• Hex wrench: 3/32"
Note:.The.Ultra.Stick.25e.comes.with.the.
necessary.landing.gear.mounts.for.the.
installation.of.the.floats..You.will.also.find.4.
molded.3.5mm.spacer.blocks.in.the.Ultra.Stick.
25e.kit.which.will.be.used.when.mounting.the.
float.mounts.onto.the.floats..Use.these.parts.in.
addition.to.the.float.hardware.to.complete.the.
installation.
17