E-flite 25-Size Fiberglass ARF Floats - Manual (Page 14)

 5. With the pushrod cable inside the pushrod tube,
attach the tube to the float using a full brass strap
and two 2mm x 10mm sheet metal screws. The
end of the pushrod tube is 1
1 /
2
" (38mm) from
the end of the float.
 6. Use two full brass straps and the half brass strap
to attach the pushrod tube to the bottom of the
fuselage. Leave the straps slightly loose so it can
be moved around for the next step.
Note:.These.straps.are.secured.onto.the.
crossbraces.on.the.bottom.of.the.fuselage.
14