beautypg.com

E-flite Eratix 3D 25e ARF User Manual

Page 13

background image

13

E-flite Eratix 3D 25e ARF Assembly Manual

7. Slide the cowling onto the fuselage. Use the propeller

adapter to attach the propeller and spinner backplate

temporarily onto the motor. Position the cowling so it

lines up with the spinner backplate, and has a small gap

between the spinner backplate and cowling.

8. With the cowl aligned with the spinner, use a drill and

1/16-inch (1.5mm) drill bit to drill through the cowl and

into the fuselage using the holes in the cowling.

9. Secure the cowling using the four 2mm x 6mm sheet

metal screws. There are two screws on each side of the

cowl as shown. Complete the cowling installation by

attaching the spinner cone using the two screws provided

with the spinner.

See also other documents in the category E-flite Air equipment: