E-flite F-86 Sabre 15 DF ARF - Manual (Page 32)

32 E-flite F-86 Sabre 15 DF ARF Assembly Manual
 10. Place 2–3 drops of thin CA in each hole to
harden the surrounding wood. This hardens the
wood, making the screws more secure.
 11. Connect the wires from the motor to those
coming from the speed control.
 12. Fit the fan unit into the fuselage with the fan
fairing facing to the bottom of the fuselage. Make
sure to fit the fan into the intake tube and that all the
screw holes for mounting the fan are visible through
the mounting lugs. Secure the fan unit in the fuselage
using four 2mm x 8mm sheet metal screws. Tighten
the screws using a #1 Phillips screwdriver.
Exhaust Tube Installation
Required Parts
Assembled airframe
Exhaust tube
Clear tape
Fan access hatch
Required Tools and Adhesives
Hobby scissors Felt-tipped pen
 1. Carefully roll or fold the exhaust tube into the
shape shown below. It is made of a durable clear
plastic and will not be harmed by doing so.
 2. Slide the exhaust tube into the fuselage, with
the wider end of the tube entering the fuselage
from the rear. It will “pop” open when it has been
inserted fully into the fuselage.