beautypg.com

E-flite F-86 Sabre 15 DF ARF User Manual

Page 23

background image

23

E-flite F-86 Sabre 15 DF ARF Assembly Manual

4. Use a hobby knife and #11 blade or side cutters

to remove the excess servo arm so it does not

interfere with the intake tube when it is installed.

5. Insert the micro pushrod connector in the hole. It

should move freely in the hole.

6. Install the nylon backplate on the pushrod

connector to secure the connector to the servo horn.

7. Use a #1 Phillips screwdriver to thread the servo

mounting screw into the two holes for mounting the

elevator servo.

8. Place 2–3 drops of thin CA in each hole to

harden the surrounding wood. This will harden the

wood, making the screws more secure.

9. Secure the rudder servo in the fuselage using

the screws provided with the servo and a #1

Phillips screwdriver.