Optional high power inrunner brushless motor power, System required equipment, Required equipment – E-flite P-47D Thunderbolt 400 ARF User Manual
Page 6
6
Optional Sport Outrunner Brushless
Motor Power System Required
Equipment*
This powerful optional power system is well suited for
small field flying and “lightweight” airframe configurations
(i.e. – no landing gear, no rudder, etc installed). Use with
the included 10x8E prop and outrunner stick mount.
EFLM1305
Park 400 Outrunner Brushless, 920Kv
EFLA311B
20-Amp Brushless ESC (V2)
THP21003SPL 2100mAh 3-Cell 11.1V Li-Po, 16GA
EFLC3005
Celectra 1-3 Cell Li-Po Charger
WSD1300
Ultra Plug, Male/Female Set (2)
*Proper throttle management is required when using high
performance setups.
Optional High Power Inrunner
Brushless Motor Power System
Required Equipment*
This is the most powerful optional power system well
suited for large field flying and “full house” airframe
configurations (i.e. – landing gear, rudder, etc. installed).
Use with the included gearbox and optional 6.5:1 gear
ratio.
EFLM1100
Park 400 Inrunner Brushless, 4200Kv
EFLM1912
Heat Sink, 20mm x 20mm
Park 400 Inrunner
EFLA311B
20-Amp Brushless ESC (V2)
EFLM243
Spur Gear, 65T 0.5 Module
EFLM1951
Pinion Gear, 10T 0.5 Module 2mm I.D.
EFLP1170
11x7 Slow Flyer Propeller (2)
THP21003SPL 2100mAh 3-Cell 11.1V Li-Po, 16GA
EFLC3005
Celectra 1-3 Cell Li-Po Charger
WSD1300
Ultra Plug, Male/Female Set (2)
*Proper throttle management is required when using high
performance setups.