E-flite P-47D Thunderbolt 400 ARF - Manual (Page 22)

Radio Installation
Required Parts
• Receiver • Servo (2)
• Clevis (2) • Speed control
• Bullet connectors • Fuselage assembly
• Rudder pushrod (13 3 /
4
")
• Elevator pushrod (13 1 /
8
")
Required Tools and Adhesives
• Drill • Drill bit: .050"
• Low-temperature hot glue
• Hook and loop material
Note: Ignore the items mentioning the rudder
servo and pushrod if you have not installed the
optional rudder.
 1. Plug the rudder and elevator servos into the
receiver. Use the radio system to center the
servos. Attach servo arms to the rudder and
elevator servos.
22