E-flite P-47D Thunderbolt 400 ARF - Manual (Page 26)

 7. Install the bullet connectors to the motor leads
of your speed control. You can solder the speed
control leads directly to the motor leads if you
prefer. Connect the speed control to the receiver.
Check that the motor rotates the correct direction
when powered up. If not, reverse the motor
leads. Use the included hook and loop material
to secure the speed control in the fuselage.
Note: Make sure the receiver and speed control
are fitted into the recesses in the fuselage.
If not, the cockpit on the canopy hatch will
interfere with these and not fit correctly.
26