E-flite P-47D Thunderbolt 400 ARF User Manual

Page 36



2. Use a razor saw to carefully shorten the motor

stick by 9/16" (15mm) if using the Park 400
outrunner motor, or 1" (25mm) if using the Park
450 outrunner motor.

Note: Due to possible variations in motor stick

length, it is best to confirm the amount required

to shorten the stick using your chosen motor

and mount before cutting the stick.



3. Attach your outrunner motor to the outrunner

motor mount using the hardware included or
provided with your motor if necessary.

Note: Some motors, like the Park 450

outrunner, may require the use of the included

aluminum spacers between the motor and

mount to provide adequate clearance for the

shaft collar.