E-flite P-47D Thunderbolt 400 ARF - Manual (Page 19)

Optional Rudder
Note: Your P-47D Thunderbolt has an option to
make the rudder functional. This section covers
the required steps for this option. You can
skip this section if you do not want to use the
optional rudder.
Required Parts
• Hinge (3) • Control horn
• Fuselage assembly • Control horn screw (2)
• Control horn backplate
Required tools and Adhesives
• Sandpaper • Hobby knife
• Straight edge • Foam-safe CA
• Felt-tipped pen
 1. Use a sharp hobby knife to carefully cut the
rudder from the fuselage. Use sandpaper to clean
up the cut on the fuselage.
19