E-flite F-15 Eagle DF ARF - Manual (Page 25)

25 E-flite F-15 Eagle ARF Assembly Manual
 17. Use side cutters to remove the outer hole from
the servo arm.
 18. Use a hobby knife to enlarge the outer hole of a
servo arm. Install the pushrod connector and secure it
using the nylon nut supplied with your model.
 19. Slide the pushrod connector onto the pushrod wire.
After centering the steering servo using the radio, install
the servo arm on the steering servo. Center the nose
wheel and secure the pushrod wire using the setscrew
and 1.5mm hex wrench. Using a Y-harness, plug the
nose gear retract servo into the gear channel. Repeat
Steps 9, 10 and 11 to adjust the nose gear retract servo.
You should find the nose retract servo will be very similar
in endpoints to one of the main retract servos.