E-flite F-15 Eagle DF ARF - Manual (Page 20)

20 E-flite F-15 Eagle ARF Assembly Manual
 4. Carefully cut a hole in the side of the fuselage to
install the main gear retract servo. Make sure to allow for
clearance of the servo arm.
 5. Fit the retract servo into the fuselage. It will extend
into the intake as shown. Make sure the servo fits in far
enough so the hole in the connector aligns with the center
line of the slot for the retract gear wire. Use 6-minute
epoxy to glue the servo in position.