E-flite F-15 Eagle DF ARF User Manual

Page 10

E-flite F-15 Eagle ARF Assembly Manual



8. With the radio system on, center the stabilator using

the guide on the side of the fuselage. Tighten the setscrew

to secure the pushrod wire to the elevator servo. Make

sure to use threadlock on the setscrew to prevent it from

vibrating loose.



9. Repeat Steps 1 through 8 to install the remaining

elevator servo. Make note that the pushrod is bent slightly

and the servo arms of both elevator servos face the same

direction. This will make both stabilators operate in the

same direction without the need to use mixing at the

radio.