E-flite F-15 Eagle DF ARF - Manual (Page 17)

17 E-flite F-15 Eagle ARF Assembly Manual
 6. Slide the wheel onto the gear. Press a spring washer
onto the wire to secure the wheel.
 7. Use a #1 Phillips screwdriver and the screws provided
with the servo to secure it in the fuselage. Make sure
to slide the servo as far to the side of the fuselage as
shown.
 8. Use side cutters to remove the outer hole from the
servo arm. This is done in case you will be installing
retracts later in the life of your model.
 9. Use a hobby knife to enlarge the outer hole of a servo
arm. Install the pushrod connector and secure it using the
nylon nut supplied with your model.