E-flite Enticement F3P ARF - Manual (Page 9)

9 E-flite Enticememt F3P Profile Assembly Manual
 2. Slide the horizontal fuselage into the vertical fuselage,
nose first. You will need to fold the elevator up onto the
stabilizer and bend the horizontal fuselage slightly to fit it
into the vertical fuselage.
 3. Flip the elevator back into its correct position and align
the tabs from the vertical fuselage into the slots in the
horizontal fuselage. Do not glue the vertical fuse to the
horizontal fuse at this time.
 4. Position the foam firewall at the front of the fuselage.
The vertical and horizontal fuselage pieces will fit tight
against the firewall. Use foam-safe CA to glue the foam
firewall to the vertical and horizontal fuselage.