E-flite Enticement F3P ARF - Manual (Page 24)

24 E-flite Enticement F3P Profile Assembly Manual
Motor Installation
Required Parts
Assembled airframe Carbon firewall
Motor w/hardware Speed control
Propeller Hook and loop tape
Motor battery
Required Tools and Adhesives
Foam-safe CA Foam-safe CA activator
Hobby knife Phillips screwdriver: #0
 1. Use foam-safe CA to attach the firewall to the
fuselage. The opening for the motor leads is on the
left-hand side of the aircraft from the pilots perspective
toward the bottom. (Make sure to locate the firewall as
pictured below.)
 2. Use a hobby knife to remove the foam from the
firewall in the location for the motor leads and in the
center of the firewall as well.
 3. Attach the motor mount to the firewall using the
hardware provided with the motor and a #0 Phillips
screwdriver.