E-flite Enticement F3P ARF - Manual (Page 22)

22 E-flite Enticement F3P Profile Assembly Manual
 11. Slide the two supports onto the 15 5 /
8
-inch (398mm)
rudder pushrod.
 12. Attach the Z-bend from the pushrod to the
rudder servo.
 13. Repeat Steps 8 and 9 to attach the pushrod to the
control horn.
 14. Use foam-safe CA to glue the pushrod supports in
the notches in the fuselage. Make sure to position the
supports so they do not bind the pushrod when operating
the rudder.