E-flite Enticement F3P ARF - Manual (Page 16)

16 E-flite Enticement F3P Profile Assembly Manual
 2. Use foam-safe CA to glue the control horns to the
ailerons and elevator. Make sure to remove any hinge
tape using a hobby knife so the support is glued
directly to the foam. All control horn supports should be
perpendicular to the hinge line.
 3. Use foam-safe CA to glue the rudder control horn
to the rudder. The horn will be on the side opposite the
elevator control horn. Again, remove any hinge tape so
the horn is glued securely to the rudder.