C-series 2-color models – Banner K80 Pick-to-Light EZ-LIGHT User Manual
Page 2
![background image](/manuals/587547/2/background.png)
* Only 4-pin integral Euro-style QD models are listed. For 2 m (6 ft) PVC cable model, omit suffix “Q” from model number (e.g.,
K50APLPGXD). For 9 m (30 ft) PVC cable model, replace suffix “Q” with “W/30” (e.g., K50APLPGXD W/30). For 150 mm (5.9 in) PVC
pigtail with 4-pin Euro-style fitting, replace suffix “Q” with “QP” (e.g., K50APLPGXDQP).
A model with a QD requires a mating cable (see
page 4
).
**N.O. = Normally Open; N.C. = Normally Closed
C-Series 2-Color Models
• Job light is Green at all times while job input is active (unless hand is present)
• Presence of hand (or pressing push button) activates output and overrides job light (turns Red) for visual verification that action was
sensed
• Retroreflective models: To simplify alignment, sensor provides Red signal when retroreflecive target is not correctly aligned
Model
Sensing Mode /
LED*
Housing
Range
Cable*
Output***
Job Light
K50APLPGRCQ
Polarized retroreflec-
tive, visible red, 680
nm
50 mm dome
30 mm mount
polycarbonate
2 m (6 ft)
Integral 4-
pin Euro QD
PNP, N.O.
Green (Red)
K50RPLPGRCQ
PNP, N.C.
K50ANLPGRCQ
NPN, N.O.
K50RNLPGRCQ
NPN, N.C.
K50APFF50GRCQ
Fixed field infrared,
880 nm
50 mm cut-
off
PNP, N.O.
K50RPFF50GRCQ
PNP, N.C.
K50ANFF50GRCQ
NPN, N.O.
K50RNFF50GRCQ
NPN, N.C.
K50APFF100GRCQ
100 mm cut-
off
PNP, N.O.
K50RPFF100GRCQ
PNP, N.C.
K50ANFF100GRCQ
NPN, N.O.
K50RNFF100GRCQ
NPN, N.C.
K50APPBGRCQ
Push button
—
PNP, N.O.
K50RPPBGRCQ
PNP, N.C.
K50ANPBGRCQ
NPN, N.O.
K50RNPBGRCQ
NPN, N.C.
K80APPBGRCQ
50 mm dome
Flat or DIN-
mount
polycarbonate
PNP, N.O.
K80RPPBGRCQ
PNP, N.C.
K80ANPBGRCQ
NPN, N.O.
K80RNPBGRCQ
NPN, N.C.
* Only 4-pin integral Euro-style QD models are listed. For 2 m (6 ft) PVC cable model, omit suffix “Q” from model number (e.g.,
K50RPLPGRC). For 9 m (30 ft) PVC cable model, replace suffix “Q” with “W/30” (e.g., K50RPLPGRC W/30). For 150 mm (5.9 in) PVC
pigtail with 4-pin Euro-style fitting, replace suffix “Q” with “QP” (e.g., K50RPLPGRCQP).
A model with a QD requires a mating cable (see
4-pin Euro-Style Cordsets
).
**N.O. = Normally Open; N.C. = Normally Closed
EZ-LIGHT® K50 and K80 Series Pick-to-Light Sensors
2
www.bannerengineering.com - tel: 763-544-3164
P/N 126441_web
Rev.G