Banner PVA Pick-to-Lights - Manual (Page 6)

Status Indicators/Troubleshooting
MODE
Status Indicator #1
Status Indicator #2
Figure 6. Status indicators
Emitter Indicator Condition Description
#1 OFF Frequency A selected (Emitter/Receiver Switch #1 both ON)
Steady Red Frequency B selected (Emitter/Receiver Switch #1 both OFF)
#2 Steady Green Power is ON and system is OK
OFF Power is OFF
Flashing Green 2x/sec Emitter Failure (remove and reapply power)
Receiver Indicator Condition Description
#1 Steady Yellow Output is active (change Switch #2 to Light Operate to turn the yellow indicator ON
when the system is clear)
OFF Output is inactive (change Switch #2 to Dark Operate to turn the yellow indicator
ON when the system is blocked)
#2 Steady Green Power is ON and system is OK
OFF Power is OFF
Flashing Green 1x/sec Receiver Failure (remove and reapply power)
PVA Pick-to-Light Array
6 www.bannerengineering.com - tel: 763-544-3164 P/N 52088_web
Rev. E