Metrohm 909 UV Digester - Manual (Page 26)

3.6 Connecting the power supply cable
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
18 ￭￭￭￭￭￭￭￭
909 UV Digester
Figure 18 Positioning the cylindrical guide for the sample holder
2 Always insert the temperature sensor into the sample vessel filled
with sample at Position 6 of the sample holder.
12
1
6
Figure 19 Inserting the temperature sensor at sample position 6
3.6 Connecting the power supply cable
Warning
An incorrect supply voltage can damage the instrument.
The 909 UV Digester is designed for 220 to 240 V. You need to use a
transformer if your power supply provides 100 to 120 V. You can find
the specification for the transformer in Chapter 9.4.2, page 40.
Proceed as follows to connect the instrument to the power supply.