Metrohm 797 VA Computrace - Manual (Page 55)

2.9 Connection of 863 Compact Autosampler
797 VA Computrace / Hardware-Manual 8.797.8001EN
47
2.9.1 Electrical connection
Before any instruments are attached to the 797 VA Computrace
Stand, the 797 VA Computrace Stand must be switched off using the
mains switch
14.
The 863 Compact Autosampler is connected to the socket “Remote 2” of the 843
Pump Station with the cable 6.1241.230 (Autosampler accessory). The socket “Re-
mote 1” of the 843 Pump Station is connected to the socket “Remote” 15 of the 797
VA Computrace Stand with the cable 6.2141.280 (Pump Station accessory) (see Fig.
15).
For connection of Dosing devices see section 2.8.
Fig. 15: Electrical connection of the 863 Compact Autosampler
Fig. 16: Tubing connections for operation of the 863 Compact Autosam-
pler