Metrohm 847 Lab Link - Manual (Page 29)

3 Operation
• Settings
1. Use Connection active to choose whether the connection is to be ac-
tive or not.
To set a connection to inactive is chiefly advisable when the connection
is not to be used for a long time. This means that it will not be included in
the regular connection check (Periodic status test, see p. 13), which re-
duces unnecessary network traffic.
For (re-)activation it is only necessary to activate this checkbox. During
the next periodic status test all the active connections will be checked
and, if necessary, restarted. Inactive connections are given the status
“inactive”.
2. With Hardware type you select whether a connection is to be made to
an 847 USB Lab Link or to its predecessor, the 825 Lab Link.
3. Under Name enter the name of your Lab Link. This name must only oc-
cur once in the network.
847 USB Lab Link / Lab Link Server 25