Metrohm 847 Lab Link - Manual (Page 12)

2 Installation
• Defaults
A common default root path can be defined for the data (methods, determi-
nations etc.) of all the Titrando systems connected to the Lab Link Server.
The specific folders for the individual Lab Link connections are defined sepa-
rately (see Section 3.1). Additionally, you can select a standard printer for all
connected Titrando systems.
1. Under Default root path enter the required Default root path.
2. Under Default printer select the printer that is to be adopted as the de-
fault printer for all Lab Link connections. Any local printer or one available
in the network can be selected here, provided that it has been installed
on the PC.
8 847 USB Lab Link / Lab Link Server