Metrohm 847 Lab Link - Manual (Page 10)

2 Installation
2 Installation
2.1 Requirements
In order to network a Titrando system using the 847 USB Lab Links you re-
quire the following equipment (see also Section 5.1 Technical data).
• Titrando system with Touch Control
• 847 USB Lab Link
• at least a 10 Mbit network with RJ45 Ethernet cable
• one free IP address per 847 USB Lab Link; Subnet Mask and Gate-
way must be known or have to be assigned by the DHCP server
The Lab Link Server software should be installed on a PC with the following
requirements:
• Processor: Pentium III
• RAM: 256 MB
• Operating system: Windows 2000/XP
• Free hard disk memory: 50 MB for program files and sufficient
space for the planned Titrando data
• Network connection with at least 10 Mbit/s
The use of Microsoft Windows 2000 or Windows XP as the operating system
is absolutely essential.
Caution!
The installation of the Lab Link Server must be carried out as "Administra-
tor". If you are using an NTFS file system then take care that the users
intending to utilize the server operation have full rights of access to the data
folders that have to be set and to all subfolders created in them. This can
be checked in Windows Explorer in the security settings in which the
properties of the corresponding folders are defined. Please note that for the
operation of the Lab Link Server software the corresponding user must
remain continuously logged in under Windows.
Windows XP: The safety settings described above are only accessible
when the option "Use simple file release" is switched off in the menu Extras
/ File options / View in Windows Explorer.
6 847 USB Lab Link / Lab Link Server