Metrohm 816 IC Eluent Selector - Manual (Page 7)

1.1 Description of the instrument
1 Introduction
1.1 Description of the instrument
The 816 IC Eluent Selector has two 3-way valves and can be inte-
grated in an IC system via an RS232 interface. When used in a Metrohm
IC system it can be operated completely by remote control.
Up to three different eluents can be used with the 816 IC Eluent Selec-
tor. In this way the 816 IC Eluent Selector makes it easy to use step
gradients in order to optimize the separating performance of your sys-
tem with difficult samples. A further frequent application is its use in a
2-channel system for investigating samples which require different
separating systems for their complete analysis, e.g. the determination
of cations and anions in a single sample. In combination with the
2-channel version of the 812 IC Valve Unit and the 761 Compact IC with
suppressor, the 816 IC Eluent Selector forms a compact IC system with
which the cations and anions in a single sample can be determined.
816 IC Eluent Selector/ 8.816.1003 Instructions for Use
1