Metrohm 816 IC Eluent Selector - Manual (Page 23)

4.1 Technical data
4 Annex
4.1 Technical data
4.1.1 Parts and controls
Keypad Chemical-resistant touch-sensitive polyester
keypad with function keys
Indicators LEDs for indicating valve status
4.1.2 RS 232 Interface
Socket D-sub socket 25-pin (male)
1 13
14 25
Standards EIA RS232C, CCITT V.24, ISO 2110, DIN 66020
Parameters Baud rate: 9600
Handshake: no handshake
Parity: none
Stop bits: 1
Data bits: 8
4.1.3 Mixer speed
Switch Dip switch, 8-position
Function Not required for the 816. We recommend that the
mixing chamber is kept switched off (all switches
down).
The left-hand six switches control the stirring
speed in mixing chamber 6, the right-hand two
have no function.
Only one of the six left-hand switches can be in
the ON position, the stirring speed increases from
left to right.
1
ON
2 3 4 1 2 3 4
ON
816 IC Eluent Selector/ 8.816.1003 Instructions for Use
17