Metrohm 816 IC Eluent Selector - Manual (Page 19)

3.1 Manual operation
3 Operation
3.1 Manual operation
Switching the instrument on/off
• The 816 IC Eluent Selector is switched on and off with mains
switch 8 (see Section 2.2.4).
Switching to manual operation
LED "EXT." 4 shows whether the instrument is controlled
externally (LED lights up) or manually (LED is out).
• Press the "EXT." 3 key to switch to manual operation of the
816 IC Eluent Selector.
Select eluent
LEDs 2 show which eluent is currently selected.
• The eluent is selected by pressing key "A", "B" or "C" 1 .
The settings are retained when the instrument is switched off.
EXT.
B
A
C
3.2 Operation via «IC Net»
Switching the instrument on/off
• The 816 IC Eluent Selector is switched on and off with mains
switch 8 (see Section 2.2.4).
Switching to external operation
LED "EXT." 4 shows whether the instrument is controlled
externally (LED lights up) or manually (LED is out).
• Press the "EXT." 3 key to switch to the external mode for
remote control of the 816 IC Eluent Selector by «IC Net».
EXT.
Only the most important functions and settings for operating the 816
IC Eluent Selector are described in this section. Further information
can be found in the Instructions for Use for «IC Net» and in the online
help for the program.
816 IC Eluent Selector/ 8.816.1003 Instructions for Use
13