2 parameters in the ph mode, 3 parameters in the t mode, 4 parameters in the u mode – Metrohm 827 pH lab User Manual
Page 64: Parameters in the ph mode, Parameters in the t mode, Parameters in the u mode
9.2 Menu structures
56
826/827 pH meter, Instructions for Use
9.2.2
Parameters in the pH mode
param
├
measurement
│ └
temp.
│
├
cal.settings
│ ├
temperature
│ ├
report
│ ├
cal.interval
│ ├
no.of buffers
│ └
buff.type
───┬
Metrohm, NIST, DIN, ...
│
└
special
┬
pH buffer1
│
├
pH buffer2
│
└
pH buffer3
│
├
cal.limits
│ ├
lo.lim.slope
│ ├
up lim.slope
│ ├
lo.lim.pH(0)
│ └
up lim.pH(0)
│
└
cal.data
├
slope
├
pH(0)
├
variance
├
temperature
├
temp.sensor
├
cal.date
├
cal.time
├
cal.interval
├
buff.type
└
no.of buffers
9.2.3
Parameters in the T mode
No editable parameters are necessary for this measuring mode. The
menu << param >> can therefore not be selected.
9.2.4
Parameters in the U mode
No editable parameters are necessary for this measuring mode. The
menu << param >> can therefore not be selected.