Metrohm 760 Sample Changer - Manual (Page 19)

3.2 Key Functions
760 Sample Changer, Introduction
16
3.2 Key Functions
The 760 Sample Changer operates in two different modes where
the keys provide different functions:
The
Basic Mode starts when the instrument is turned on. The
ready-to-operate status is indicated by the green LED.
Basic Mode:
(after
Power on, green LED on)
START
Starts processing of a sample series.
STOP
RESET
Stops processing of a sample series or initializes the
760 Sample Changer.
HOLD
Interrupts processing of a sample series, green LED
blinks.
START
Continues processing of a sample series.
The
Configuration Procedure starts when the instrument is
switched on with pressing simultaneously. The green
LED blinks once. Now, the method can be selected and working,
rinsing and shift heights as well as the stirrer speed can be de-
fined.
Configuration Procedure:
(after
Power on with pressed, green LED blinks once)
START
Accepts the setting of a value and moves on to the
next value.
HOLD
Learning mode, manual execution of a changer func-
tion for setting a configuration.
STOP
RESET
Cancels a configuration setting and initializes the 760
when is pressed twice. Switches back to
basic condition.