Metrohm 760 Sample Changer - Manual (Page 10)

2.3 Arranging the Accessories
760 Sample Changer, Installation 7
2.3 Arranging the Accessories
2.3.1 Connecting the Keyboard
Made by Metrohm Herisau Switzerland
Keyboard
Type 1.760.0010 Nr. 0010/01104
The keyboard is to be con-
nected to the keyboard
socket on the rear side of the
sample changer.
To disconnect press the plug
together slightly on both
sides.
2.3.2 Magnetic Stirrer
Magnetic stirrers 2.741.0010
may be placed in any position
on the stirrer rail beneath the
rack.
2.3.3 Racks
After placing the rack on the
turntable, the sample
changer must be initialized by
pressing the key
or turning the sampler
changer off and on. This
enables the safe reading of
the magnetic rack code and
can only be done if rack
position 1 is directed to
tower 1. Before a rack is
used for the first time, the lift
positions have to be set (s.
Chapter. 3.4).
Rack
Stirrer rail
Magnet holder
Magnetic sensor
Rack