Metrohm 835 Titrando - Manual (Page 33)

2 Installation
Titrando Installation Instructions
27
PC Control and tiamo
If the Titrando system is operated with the PC Control/tiamo software, a
Bluetooth USB adapter can be connected to a USB port of the com-
puter (or of the Titrando/USB Sample Processor). The driver software
(for MS Windows 2000/XP), supplied by the manufacturer of the Blue-
tooth adapter, must be installed as specified in the related instructions.
A Bluetooth USB adapter must support the Bluetooth specifications
HCRP (Hardcopy Cable Replacement Profile for printers) and/or
SPP (Serial Port Profile for balances or RS232 connections). Printer
drivers must be configured before installation of the Bluetooth adapter.
Touch Control
If the Titrando system is operated as a stand-alone system with an
840 Touch Control, the Metrohm Bluetooth USB Adapter for 840
(6.2162.000, Bluetooth ® V1.1 qualified Class 2 device) will be required
for a Bluetooth connection.
Note!
The Metrohm Bluetooth USB Adapter cannot be operated on a
computer. The adapter is designed exclusively for use in a Titrando
system in stand-alone mode, i. e. with a 840 Touch Control as control
unit. The version 5.840.0130 or higher of the Touch Control software is
required.
The Metrohm Bluetooth USB adapter guarantees wireless data transfer
over a distance of up to 10 m and is easy to install.
Connect the Bluetooth adapter to a free USB port on the rear of the
Titrando/USB Sample Processor.
Switch on the Touch Control. The Bluetooth USB adapter is recog-
nized automatically.
Configure the adapter in the device manager of the Touch Control
as described in the Instructions for Use for PC Control/Touch Con-
trol.
Printers and Bluetooth
A Bluetooth-enabled printer or a Bluetooth printer adapter must support
the HCRP Hardcopy Cable Replacement Profile.
Please refer to the printer's User Manual for the settings required for a
Bluetooth-enabled printer. Bluetooth printer adapters can normally be
connected to the USB port of the relevant printer without the need for
configuration. Please note what is said in the printer adapter's docu-
mentation. The printer type is defined in the device manager of Touch
Control.
Balances and Bluetooth
A Bluetooth-enabled balance or a Bluetooth serial adapter must comply
with the SPP Serial Port Profile in accordance with the Bluetooth
specifications. If the manufacturer of the balance offers a specific Blue-