Metrohm 835 Titrando - Manual (Page 14)

1.4 Safety notes
8
Titrando Installation Instructions
1.4 Safety notes
Warning!
This instrument should only be used in accordance with the informa-
tion given in these installation instructions.
1.4.1 Electrical safety
Please observe the following guidelines:
• Only qualified Metrohm technicians should carry out service work
on electronic components.
• Do not open the Titrando housing. This could destroy the Titrando.
Inside the housing there are no components that the user can ser-
vice or exchange.
Electrical safety when handling the Titrando is guaranteed within the
framework of the IEC 61010 Standard. The following point must be ob-
served:
Protection against electrostatic charges
Warning!
Electronic components are sensitive to electrostatic charges and can
be destroyed by a discharge. Always remove the mains cable from
the power supply socket before setting up or breaking electrical con-
nections on the rear panel of the instrument.