Caution – DJI H3-3D User Manua User Manual
Page 8
©2014 DJI Innovations. All Rights Reserved.
8
3.
Insert washers into securing pins to lock the damping unit in place.
4.
Plug the 8-pin cable from the Phantom 2 to the Phantom 2 port on the anti-interference enhancement
board, then connect the H3-3D port on the anti-interference enhancement board with the 8-pin port on
the gimbal via the supplied 8-pin cable.
Caution:
(1)
Aircraft and accessories are not included with gimbal.
(2)
Camera must be aligned with the nose of the aircraft.
(3)
Gimbal is calibrated before delivery. Do not attempt to adjust or calibrate it yourself.
(4)
Do not attempt to remove screws in the gimbal, which may result in reduced performance or even
damages.
(5)
Do not unplug any cable attaching to the gimbal ports, or change the mechanical structure of the gimbal.