DJI H3-3D User Manua - Manual (Page 2)

©2014 DJI Innovations. All Rights Reserved.
Warning & Disclaimer
H3-3D gimbal is calibrated before delivery, no adjustment or modification to the
gimbal is allowed.
Ensure the camera is mounted to the gimbal before powering the aircraft.
H3-3D gimbal is finely calibrated according to the specified camera model and lens before the delivery. User does
not need to perform extra calibration. Do not attempt to modify the gimbal or mount extra component/device
(such as filter, lens hood, etc.) to the camera; be sure to use the DJI approved battery; otherwise it may affect the
performance of the gimbal.
The H3-3D gimbal is compatible with following DJI flight control system: NAZA-M, NAZA-M V2, WooKong-M and
Phantom 2 and A2. To optimize the gimbal performance, download the above mentioned Assistant Software and
upgrade the firmware of the flight control system.
Make sure the flight control system is operating in the safest manner. We strongly recommend customers to
remove all propellers before powering the aircraft, use power supply from R/C system or flight pack battery, and
keep children when calibrating and configuration the gimbal. Observe the procedures contains in this manual to
mount and connect gimbal on your aircraft. User of this product shall respect the AMA’s National Model Aircraft
Safety Code.
DJI Innovations has no control over use, setup, final assembly, modification (including use of non-specified DJI
parts i.e. motors, ESCs, propellers, etc.) or misuse, no liability shall be assumed nor accepted for any resulting
damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. DJI assumes no
liability for damage(s), injuries or legal responsibilities incurred directly or indirectly from the use of this product.
DJI and H3-3D are registered trademarks of DJI Innovations Names of product, brand, etc., appearing in this
manual are trademarks or registered trademarks of their respective owner companies. This product and manual are
copyrighted by DJI Innovations with all rights reserved. No part of this product or manual shall be reproduced in
any form without the prior written consent or authorization of DJI Innovations. No patent liability is assumed with
respect to the use of the product or information contained herein.
Profile
The H3-3D gimbal offers excellent stabilization features for aerial hobbyist and professional aerial
photographers. Powered by built-in IMU (Inertial Measurement Unit) and special servo module, this gimbal
provide unique stable quality visual experience for the users.