Accessory pack – camera securing bracket x1, Accessory pack – spare screws ×1, Accessory pack – gimbal video signal cable ×1 – DJI H3-3D User Manua User Manual

Page 4: Accessory pack – can-bus cable×1, Accessory pack – 8-pin cable×1, Accessory pack – anti-interference boardx1

Accessory Pack – Camera securing bracket x1

Camera mounting bracket.

Accessory Pack –

Spare Screws

×1

M2.5x6.3

：Mounting camera to gimbal.

M2.5x5

：Secure gimbal to damping unit.

M3x8, M3x6.5

：Securing gimbal to aircraft.

Accessory Pack –

Gimbal Video signal Cable

×1

For the gimbal controller unit and your wireless video transmission

module connection, transmitting the video signal.

Accessory Pack – CAN-Bus Cable×1

Use CAN-Bus to connect the GCU with the flight control system.

Accessory Pack – 8-Pin Cable×1

Connect to Phantom 2 or G8 port of GCU.

Accessory Pack – Anti-interference boardx1

Serves as the connector board between G8 port on the gimbal

and 8-pin cable. This board is only available to the H3-3D gimbal

that does not come with GCU unit. (namely, for Phantom 2 only

version of H3-3D)