DJI H3-3D User Manua - Manual (Page 15)

©2014 DJI Innovations. All Rights Reserved.
15
3 Configuration
3.1 Driver and Assistant Software Installation
Notes:
(1) The content of this chapter does not apply to the Phantom 2 version of the gimbal. Refer to Phantom 2
Assistant Software on the DJI website instead.
1. Ensure the drivers for the flight control system are properly installed.
2. Download the Assistant Software from DJI official website.
3. Launch Assistant Software installer and follow the prompted steps to finish installation.
4. Run the Assistant Software.
3.2 Assistant Software GUI
Connect GCU to the PC via a Micro-USB cable and then power on the GCU.
Communication indicator
 Blue LED On: Lost communication
 Blue LED Blink: Communicating
 Red LED On: Disconnected from PC
 Green LED On: Connected with PC
Text Description
Connection indicator
 Hover on the area (3) to display the information.
1
2
6
5
1
2
6
5
4
3
4
Language
 中文or English
Menu
 Basic: Basic function setting
 Upgrade: For upgrading the gimbal firmware
 Info: For version and serial number information
3
3.3 Channel Setting
You can adjust the range of camera tilt motion from Assistant Software by sliding the slider in the GUI.