DJI Naza-M - Manual (Page 9)

©2013 DJI Innovations. All Rights Reserved. 9 |
6. Select the “Upgrade” option. Check the Main Controller, GPS and IMU firmware version.
7. Select the “Basic” option. Please follow step-by-step for your first-time-configuration. Basic configuration
is necessary, including Mixer Type, Mounting, RC, and Gain settings.
8. You can click the “Advanced” option for more parameter settings. Advanced setting is optional. There are
settings of Motor, FailSafe, Intelligent Orientation Control (IOC), Gimbal, Low-Voltage Alert, and Flight
Limits. Read the instruction in the assistant software to obtain more details.
9. Select the “Viewer” option to check all parameters.
10. Then break the Micro-USB cable, power off the aircraft. Finished.
(1) You may be required to fill register information for your first-time-usage.
(2) If the communication indicator is blue on, please double check the connections.
(3) Basic configuration is necessary before you go to the “Basic Flying Test”.
(4) Users are required to install a Windows system, since the software can only run on Windows
system .
(1) If the firmware upgrade is available, please upgrade it by referring to the Firmware Upgrade
in the Appendix.
(2) This step is required to use together with the assistant software to obtain more details.
Recommended Parameters
Recommended Settings for using F330/F450/F550
Configuration Information Basic Gain Attitude Gain
Motor ESC Propeller Battery Weight Pitch Roll Yaw Vertical Pitch Roll
F330 DJI-2212 DJI-18A DJI-8 Inch 3S-2200 790 g 140 140 100 110 140 140
F450 DJI-2212 DJI-30A DJI-8 Inch 3S-2200 890 g 150 150 100 105 150 150
F550 DJI-2212 DJI-30A DJI-8 Inch 4S-3300 1530 g 170 170 150 140 170 170