DJI Naza-M - Manual (Page 23)

©2013 DJI Innovations. All Rights Reserved. 23 |
Appendix
Specifications
General
Built-In Functions
(1) Three Modes of Autopilot
(2) Enhanced Fail Safe
(3)Low Voltage Protection
(4)S-Bus/S-Bus2 Receiver Support
(5)PPM Receiver Support
(6)2-axle Gimbal Support
Peripheral
Supported Multi-rotor  Quad-rotor I4, X4;
 Hexa-rotor I 6, X6, IY6, Y6.
 Octo- rotor I8 , V8 , X8
Supported ESC output 400Hz refresh frequency.
Recommended Transmitter PCM or 2.4GHz with a minimum 4 channels.
Assistant Software System Requirement Windows XP SP3; Windows 7; Windows 8
Electrical & Mechanical
Working Voltage Range  MC: 4.8V ~ 5.5 V
 PMU Input: 7.4V ~ 26.0 V (recommend 2S ~ 6S LiPo)
Output(V-SEN port red wire): 3A@5V
Output(V-SEN port red wire)burst current:7.5A
Power Consumption  MAX: 1.5W(0.3A@5V)
 Normal: 0.6W(0.12A@5V)
Operating Temperature -10°C ~ 50°C (14F ~122F)
Weight
 MC: 27g
 GPS/Compass: 27g
 PMU: 28g
 LED: 13g
Dimensions
 MC: 45.5mm × 32.5mm × 18.5mm
 GPS/Compass: 46mm (diameter) x 10mm
 PMU ：39.5mm × 27.5mm × 10.0mm
 LED ：25mm × 25mm × 7.0mm
Flight Performance
(can be effected by mechanical performance and payloads)
Hovering Accuracy (GPS Mode)  Vertical: ± ± 0.8m
 Horizontal: ± ±2.5m
Max Yaw Angular Velocity 200°/s
Max Tilt Angle 35°
Max Ascent / Descent Speed ±Ascent : 6m/s, Descent: 4.5 m/s