DJI Naza-M - Manual (Page 8)

©2013 DJI Innovations. All Rights Reserved. 8 |
4. Locate the NAZA-M V2 icon in the Finder and open the file by Control or right clicking the icon and
selecting “Open” from the menu.
5. After the first successful launch, double-clicking the NAZA-M V2 icon in the Finder or using Launchpad
will open the application.
Installer in DMG format is supported on Mac OS X 10.6 or above.
The NAZA-M V2 Assistant on Mac OS X and Windows are exactly the same. The Assistant appear in
other places of this manual is based on Windows version.
Step2 Configuration by Assistant on a PC
1. Power on the PC. Make sure your computer is connected to the Internet for the first time you use.
2. Switch on the transmitter first, and then power on the autopilot system. Connect the autopilot system to
the PC with a Micro-USB cable. DO NOT break the connection until setup is finished.
3. Run the Assistant Software.
4. Observe the indicators on the left bottom of the software. ( They are the connection indicator and
communication indicator in order.) If the communication indicator is blinking, that the software is ready,
please go to next step.
5. Select the “Info” option. Check the software firmware version. If the upgrade is available, you may update
the assistant software.