Calculated Industries 5060 - Manual (Page 62)

60 — ElectriCalc Pro
Battery Information
The calculator is powered by a single 3-
Volt Lithium CR-2032 battery. This
should last upwards of 800 hours of
actual use (1 year plus for most peo-
ple). If the display becomes very dim or
erratic, replace the battery.
NOTE: Please use caution when dis-
posing of your old batteries as they
contain hazardous chemicals.
Battery Replacement Instructions:
1) Hold calculator upright with back of
calculator toward you.
2) Lift battery holder out from the top of
the calculator.
3) Remove the old battery.
4) Place new battery with positive side
against the bottom of the holder.
5) Insert holder into calculator with pos-
itive side of battery facing back of calcu-
lator.